|
|
|
|
|
|
Posted by Alex on July 11, 2001 at 05:20:50:
In Reply to: Cutting vent hole in glass posted by Joe on July 11, 2001 at 05:19:58:
You will need to buy or borrow a circular glass cutter. Prices range from $24-$60. See if thwe local frame shop has one you could borrow for a few dollars.
http://www.pointshop.com/Mall/Catalog/Product/ASP/product-id/43199/store-id/1000011211.html ($24)
http://www.aanames.com/cut.htm ($24)
http://dragons-lair.hypermart.net/Glass/inland_strip_guide.htm
http://www.inlandcraft.com/Uguides/UGarchive/UGstrip.htm
http://www.glastar.com/scc_instructions.html
http://www.khue.com/dept/cutt/fcirc.htm
http://www.glassmart.com/lens_cutter.asp