InsideSpaces


[ Follow Ups ] [ Post Followup ] [ Insidespaces.com Message Board ] [ FAQ ]

Posted by David on February 23, 2001 at 06:25:17:

In Reply to: cabinet door knobs posted by Scott on February 22, 2001 at 18:53:22:

What you need is to make a "jig". There are commercial versions, but you can easily construct these from some scrape wood or plywood. Start with a piece of wood (ply or solid 1/2 to 3/4" thick) 3" x 6". Along two sides secure 3/4" x 3/4" strips. Lay this template over the corner of the door. Mark the template for the two holes. Make mirror image jig for adjacent doors.
For the drawers, start with a larger piece, say 6" x 6" and add just one 3/4" x 3/4" strip. Hang this along the top edge of the drawer and mark
holes symmetrically about the centerline of this jig. For the next draw, measure the center, hang the jig and drill the holes.



Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Insidespaces.com Message Board ] [ FAQ ]