|
Make your own molding
Wood moldings are expensive and are
rarely the same wood as the tongue and groove paneling. For the
exterior trim corner, you can make your own molding.
This can be made of two pieces of
paneling, ripped to 5/16" thickness. One is 1" wide
and the other 1-5/16". Glue and clamp or nail the two
pieces together.
Use a palm or hand sand the three
outer corners.
Install the molding with 4d nails
and paneling adhesive. Avoid using excess glue and keep the
number of nails to a minimum.
|
