InsideSpaces


[ Follow Ups ] [ Post Followup ] [ Insidespaces.com Message Board ] [ FAQ ]

Posted by Dave on May 29, 2001 at 10:45:30:

In Reply to: window fan posted by sonja on May 07, 2001 at 11:41:15:

The fan bearings may be worn out or possibly the fan blade is just touching the housing. The shaft of the fan motor normally has some play allowing the shaft to move back and forth along the axis of the shaft. If the shaft slides more than 3/16" check to see that the o-ring is properly in place. You may need to add a few washers to take up the slack.




Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Insidespaces.com Message Board ] [ FAQ ]